How to Make a Back Seat Extender for Dogs?

Last Updated on April 1, 2024 by Francis

If you are a pet parent, you know the struggle of having a beloved four-legged friend who needs a bit of extra space on car rides. Whether you are taking a short trip to the store or a longer road trip, it can be difficult to keep your pup comfortable and secure in the back seat. But don’t worry! This article will show you how to make a back seat extender for your pooch that will make car rides more enjoyable for everyone. With a few simple materials, you can create a safe and comfortable space for your pet that will make car rides easier and more enjoyable. So let’s get started!

How to Make a Back Seat Extender for Dogs?

Steps to Make a Back Seat Extender for Dogs

Creating a back seat extender for your dog is a great way to keep your pup safe and comfortable while driving. It is also a great way to keep your car clean by preventing your pet’s fur from becoming embedded in the upholstery. Making your own back seat extender is not difficult and can be done with a few simple tools and materials.

Before starting, it is important to measure the space between the driver’s and passenger’s seats in order to determine the size of the extender that is needed. It is also important to consider the size of your dog and the amount of space that it needs to be comfortable.

Once you have the measurements, it is time to start on the project. Here are the steps to make a back seat extender for your pup:

Step 1: Gather the Materials

The materials you will need include: a piece of plywood or particle board, a jigsaw, a drill, screws or nails, sandpaper, fabric, and foam.

You may also need other materials depending on the style and design of the extender you are making.

Step 2: Cut the Pieces

Using the jigsaw, cut the plywood or particle board into the pieces that are needed for the extender. The pieces should be the same size as the measurements taken of the space between the two seats.

If desired, you can use a piece of cardboard to make a template before cutting the pieces. This will help ensure that the pieces are cut to the correct size.

Step 3: Assemble the Pieces

Once the pieces are cut, it is time to assemble them. Use the drill and screws or nails to attach the pieces together.

Be sure to use screws or nails that are long enough to secure the pieces together. You may also need to use a few clamps to hold the pieces in place while they are being assembled.

Step 4: Sand the Extender

When the extender is assembled, it is time to sand it. Use the sandpaper to smooth out any rough edges. Be sure to sand the extender until it is completely smooth.

You may also want to use a primer or sealant to protect the extender from wear and tear.

Step 5: Add the Upholstery

Once the extender is sanded, it is time to add the upholstery. Use the fabric and foam to cover the extender. Be sure to use staples or glue to secure the upholstery in place.

You may also want to add a few accessories such as a handle or a cup holder. These can be added at this point as well.

Step 6: Install the Extender

When the upholstery is added, it is time to install the extender in the car. Position the extender between the driver’s and passenger’s seat. Use the screws or nails to secure the extender in place.

Be sure to test the extender before you take your pup for a ride. Make sure it is secure and comfortable for your pup.

Related Faq

What Materials Are Needed to Make a Back Seat Extender for Dogs?

You will need some basic materials to make a back seat extender for your dog. These include plywood, screws, foam padding, fabric, and a drill. You will also need a saw to cut the plywood to the right size. To secure the foam padding, you will also need a strong adhesive.

What Is the Best Way to Measure the Plywood?

The best way to measure the plywood is to first measure the back seat of your car. Measure the length and width of the seat and add about four inches to each measurement to account for the sides and ends of the extender. Once you have the measurements, use a saw to cut the plywood accordingly.

How Do You Attach the Foam Padding?

To attach the foam padding to the plywood, you will need to use a strong adhesive. Start by applying a thin layer of adhesive to the plywood and then place the foam on top. Make sure the foam is firmly attached to the plywood and then let it dry.

How Do You Secure the Fabric to the Plywood?

The best way to secure the fabric to the plywood is by using a staple gun. Start by laying the fabric on the plywood and then use the staple gun to secure it in place. Make sure to start at the center and work your way out to the corners to ensure that the fabric is secure.

How Do You Install the Back Seat Extender?

To install the back seat extender, you will need to use screws to secure it to the back seat of your car. Start by drilling pilot holes where you will be inserting the screws. Once the holes are drilled, insert the screws and then use a drill to secure them in place.

What Are the Benefits of Having a Back Seat Extender for Dogs?

Having a back seat extender for dogs has many benefits. It can provide a safe and comfortable environment for your dog during car rides. It can also help to protect your car seats from dirt and damage. Additionally, it can help to keep your dog from jumping around in the car, which can be distracting and potentially dangerous.

Making a back seat extender for your dog is a great way to ensure that you and your pup can travel safely and comfortably. Not only will it provide a secure spot for your pup to sit and relax during your trips, but it will also help to protect your vehicle from damage caused by sharp claws or accidental spills. With just a few simple steps, you can create a custom-made back seat extender that’s perfect for your pup. So grab some tools and materials, and get ready to make your pup’s next road trip even more enjoyable!

Leave a Comment